//
//

Smallboreshotgun.org is not responsible for accidents resulting from reloading these rounds. Our articles on the slugs and other reloading material is for information only, the actual use of that information is the responsibility of the consumer. All reloading requires great care and diligence in the maintenance of safety precautions/procedures. Please be careful and never reload any recipe before checking with the proper manufacturers of the components used.
Having stated the typical safety message to cover my butt, here’s what you want to Know – recipes for my 410 slugs, pumpkin Ball rounds and busckshot! Believe me when I say that I have shot alot of .410 Shotgun slugs, .410 Buckshot and .410 Pumpkin Ball rounds and I can say with confidence that for the money invested – mine are the best.
Please remember to reload responsibly. Do not attempt to altar these loads. They are safe, functional and have taken three years to perfect. Enjoy!
Slugs
Pumpkin Balls
Buckshot
The Staff at Smallbore
- .395 Pumpkin Ball Round from 25 yards. Both balls passed through the tailgate after entering 1.5″ apart
- My Newest .410 Toy Mossberg 500
___________________________________________________________
Shell Case | Primer | Powder | Grains | Pressure | Velocity | Crimp |
Federal 3″ | Win 209 | 2400 | 20.5 | 10,300 psi | 1320 | Roll Crimp |
Federal 3″ | Win 209 | IMR 4227 | 19.2 | 10,100 psi | 1320 | Roll Crimp |
Remington 3″ | Win 209 | 2400 | 19.3 | 11,300 psi | 1320 | Roll Crimp |
Remington 3″ | Win 209 | IMR 4227 | 19.0 | 10,300 psi | 1280 | Roll Crimp |
Winchester 3″ | Win 209 | 2400 | 18.2 | 12,300 psi | 1300 | Roll Crimp |
Winchester 3″ | Win 209 | IMR 4227 | 19.4 | 11,100 psi | 1350 | Roll Crimp |
FOR MORE GREAT .410 SLUG INFORMATION VISIT http://www.buckandslug.co.uk/
THIS ARTICLE PRINTED BY PERMISSION.
________________________________________________________________________
Hello, I am looking for some 410 tried and true slug and defensive shot reloading data. There is good data in my 5th edition Lyman bible, but nothing for 410 slug or defensive loads. I’d rather not experiment. I am in the U.S.A
I have hand reloaded some 410 bore shotgun shells and they will not fit into the chamber. The brass is OK, but the hulls are sticking. Any suggestions?
Need reloading data for 410 shotgun hulls using 1/4 oz slugs and Winchester 296 power. 2 1/2 or 3 inch hulls. Thanks!!!